Ramset Pre-Fabricated Direct Burial 24 Foot - 4' x 8' or 6' x 6' - Vehicle Loop with 40' Lead-In - Saw-Cut Loop

Details

Ramset Pre-Fabricated Direct Burial 24 Foot - 4' x 8' or 6' x 6' - Vehicle Loop with 40' Lead-In - Saw-Cut Loop

The Ramset 800-85-60 Preformed Saw-Cut Inductance Loop is for installation in asphalt or concrete with a 3/16" saw-cut groove. Saw-cut loops are designed for existing driveways and surfaces and this loop comes pre-tested in three different ways, including a meg-ohm meter, inductance meter, and live detector. With the lead-in and loop jackets the same size, there's no need for a second cut, streamlining the installation process.

Features:

• Custom Polyethylene Outer Jacket
• Compact Size And Reduced Weight
• No Air Pocket In Loop Wire Design
• Pre-Phased And Color Coded At Factory
• 16 AWG Loop Wire Design For Superior Performance
• Requires 30-40 percent Less Sealant To Seal Groove
• For Installation In Asphalt Or Concrete 3/16 Saw-Cut Groove
• Built-In Backer Rod And Third Level of Insulation Protect Against Failure

Loop Specifications:

• Install Loop Black Side Up
• Conductor: #16 AWG Wire
• Loop Size: 24' (4' X 8' or 6' X 6')
• Outer Jacket: LLDPE Outer Jacket
• Inner Jacket: Micro-Dusted Nylon Coated Inner Jacketed

Lead-In Specifications:

• Length: 40'
• Conductor: #16 AWG Wire
• Outer Jacket: LLDPE Outer Jacket
• Inner Jacket: Micro-Dusted Nylon Coated Inner Jacketed